Assemble A Daybed Porch Swing

Daybed porch swing – A rustic porch swing can liven up any home and will soon become a gathering place for your family. There are many styles of porch swing to choose from, with wicker and wood two common building materials. Once you have chosen your swing, to hang there long. If you cannot reach the ceiling joists to hang your swing, you’re better off buying a frame from hanging your daybed porch swing.

Posted on November 8, 2017 Porch

Inspect your roof beams, otherwise known as slabs. To properly support the weight of a swing, you must have studs measuring 2-by-6 feet minimum. Measure the length from the joists to the floor of the porch and the length of the chain or rope that comes with your daybed porch swing. Cutting chain with bolt cutters swing hanging at least 18 inches from the ground. Measure the distance between the two swing arms with tape measure before you begin. Use a tape measure and a pencil to mark two dots on the joists at this same distance; this is where you want to install eye bolts to support your daybed porch swing.

12 Photos Gallery of: Assemble a Daybed Porch Swing

Nice Daybed Porch SwingSize: 1200 x 1200

Large Daybed Porch SwingSize: 1024 x 768

Daybed Porch Swing IdeasSize: 1568 x 1154

Daybed Porch Swing DesignSize: 1500 x 1125

How to assemble a daybed porch swing. Screw eye bolts into these holes so that the eye hanging down to the ground. Remove the eye bolts securely. You can use pliers or a screwdriver as a lever for the last few laps. Hang S hook through the eye bolt. Put a link in the chain to the other end of the S-hook. Make sure that the swing hanging at least 18 inches from the ground.

RELATED TOPIC:   Adding a Porch to a House Design